Thickened by new complex thickening agent, SINOPEC Lithium Complex Grease with Molybdenum Disulfide is made from deeply refined mineral oil with molybdenum disulfide anti-wear agent and other additives through special technical process. According to GB/T 7631.8-90(ISO6743/9-1987), it can be classified as follow:L-XBFBB 1,L-XBFBB 2,L-XBFBB 3.
Features & Benefits
· Outstanding EP and anti-wear properties. Effectively reduce abrasion and pitting on friction pairs and extend service life.
· Excellent high temperature performance. Can be used under higher temperature.
· Outstanding mechanical stability and oxidation stability to ensure longer drain period.
· Very good anti-water and rust resistant properties and good protective ability.
· Do not contain any heavy metal, nitrite and any other chemicals that will do harm to human’s health and pollute environment.
· Meets the following performance specification: Q/SH303 348—2004
· It is suitable for high temperature and heavy-load equipment in metallurgical industry, also can be applied other devices in printing and dyeing industry, high capacity motor, kiln car and hot oil pump.
· Application temperature range::-20?C to 180?C.
|Items||Typical Properties||Test Methods|
|Worked Cone Penetration,0.1mm||332||280||237||ASTM D217|
|Dropping Point,?C||272||279||300||ASTM D2265|
|Copper Corrosion (T2 copper strip,100?C,24h)||pass||pass||pass||JIS K 2220.5.5|
|Leakage (104?C,6h),g||0.03||0.02||0.05||ASTM D1263|
|Corrosion prevention (52?C,48h), grade||1||1||1||ASTM D1743|
|EP properties||ASTM D2783|
|Weld Point, PD,N||2452||2452||2452|
· Prevent water and impurities during storage and transportation.
· Do not mix with other type of grease.
· Do not heat before using.